Shower Water Softener Upgrade Kit
Shower Water Softener Upgrade Kit
The old system had to be taken apart for every recharge, which was inconvenient. The upgraded version makes recharging much easier.
🔹 What’s Improved
- Easier Recharge: The curved pipes were replaced with easy-to-turn valves, so you no longer need to remove the system. Just turn the valves to complete the recharge.
- More Durable Parts: The valves and fittings were upgraded to nickel-plated, rust-resistant components. They last longer and stay in good condition over time.
New users can ignore this upgrade kit.
Couldn't load pickup availability
WHAT'S INCLUDED
WHAT'S INCLUDED
- Softener bottle cap and two valves
- Short connector hose that links the filter and softener, made for the new valves
- Valve and elbow wrench for upgrading the system
- Plumber’s tape for the upgrade
- New recharge pump and hose kit for recharging the upgraded system
- Elbow piece to replace the original one on the filter
HOW TO UPGRADE
HOW TO UPGRADE
To upgrade, you need to replace the original softener bottle cap with the new one. We have a full text guide and video tutorial you can follow:
🔹 Upgrade Steps:
- Wrap plumber’s tape around both valves, about 18 turns each.
- Attach the long valve to the inlet on the new softener cap, and the short valve to the outlet.
- Use the valve wrench to tighten both valves onto the cap. The inlet valve elbow should point downward, and the outlet valve elbow should point upward.
- Remove the old cap from the softener.
- Unscrew the connector piece from the old cap (turn clockwise) and pull the center tube out of the cap.
- Insert the center tube into the new cap, then reinstall the connector piece (turn counter-clockwise) to secure it.
- Make sure the O-ring is properly seated on the new cap.
- Carefully align the cap with the softener bottle and screw it on tightly.
- Reinstall the system following the latest installation video. After setup, check our updated recharge video — the new system makes recharging much easier.
Recharge Guide for the Upgraded System
The upgraded system does not need to be taken apart. You only need to turn the valves to complete the salt-water recharge. All other recharge steps stay the same — only the salt-water circulation step has been improved and simplified.
Upgrade Guide for the Softener System
You will need to remove the old softener bottle cap from your current system. Then follow the steps in the video tutorial to install the new cap and valves one by one. After everything is reinstalled, you can enjoy the easier recharge process.
Shower Water Softener System
Shower Water Softener System
SoftWaterCare provides a complete shower water solution — combining an ACF filter and a water softener to remove both harmful chemicals and hard water minerals for cleaner skin and smoother hair.
