Kit de Actualización para Suavizador de Agua de Ducha
Kit de Actualización para Suavizador de Agua de Ducha
El sistema antiguo tenía que desmontarse para cada recarga, lo que resultaba incómodo. La versión mejorada facilita mucho la recarga.
🔹 Qué se ha mejorado
- Recarga más fácil: Las tuberías curvas fueron reemplazadas por válvulas fáciles de girar, por lo que ya no es necesario desmontar el sistema. Solo gira las válvulas para completar la recarga.
- Partes más duraderas: Las válvulas y conexiones se mejoraron con componentes niquelados y resistentes al óxido. Duran más y se mantienen en buen estado con el tiempo.
New users can ignore this upgrade kit.
Thank you for your interest in our upgrade kit. Due to higher-than-expected demand, it is temporarily out of stock. Orders placed now may ship with a short delay. Once the new stock arrives, we will ship all orders in the order they were received. Thank you for your understanding.
WHAT'S INCLUDED
WHAT'S INCLUDED
- Softener bottle cap and two valves
- Short connector hose that links the filter and softener, made for the new valves
- Valve and elbow wrench for upgrading the system
- Plumber’s tape for the upgrade
- New recharge pump and hose kit for recharging the upgraded system
- Elbow piece to replace the original one on the filter
HOW TO UPGRADE
HOW TO UPGRADE
To upgrade, you need to replace the original softener bottle cap with the new one. We have a full text guide and video tutorial you can follow:
🔹 Upgrade Steps:
- Wrap plumber’s tape around both valves, about 18 turns each.
- Attach the long valve to the inlet on the new softener cap, and the short valve to the outlet.
- Use the valve wrench to tighten both valves onto the cap. The inlet valve elbow should point downward, and the outlet valve elbow should point upward.
- Remove the old cap from the softener.
- Unscrew the connector piece from the old cap (turn clockwise) and pull the center tube out of the cap.
- Insert the center tube into the new cap, then reinstall the connector piece (turn counter-clockwise) to secure it.
- Make sure the O-ring is properly seated on the new cap.
- Carefully align the cap with the softener bottle and screw it on tightly.
- Reinstall the system following the latest installation video. After setup, check our updated recharge video — the new system makes recharging much easier.
Recharge Guide for the Upgraded System
To thank users of the previous version for your support, we’ve introduced an upgrade kit so you can enjoy the improved recharge experience as well.
🔹 No Disassembly Needed
With the upgraded system, you don’t need to take anything apart.
🔹 Simple Valve Control
Just turn the valves to complete the salt-water recharge.
🔹 Same Steps, Easier Process
All other steps stay the same—only the salt-water circulation step has been simplified.
Upgrade Guide for the Softener System
🔹 Replace the Old Cap
Remove the original softener bottle cap from your system.
🔹 Follow the Video Guide
Install the new cap and valves step by step using the tutorial.
🔹 Enjoy Easier Recharging
Once installed, you can use the simpler recharge process.
Sistema Suavizador de Agua para Ducha
Sistema Suavizador de Agua para Ducha
SoftWaterCare ofrece una solución completa para el agua de la ducha: combina un filtro ACF y un ablandador de agua para eliminar tanto los químicos nocivos como los minerales del agua dura, logrando una piel más limpia y un cabello más suave.
